Unlock iphone steps

Unlock iphone steps
Step5
Power-up the iPhone

Congratulation if you have completed step 4.now power up your phone by connecting it with USB. Do not connect case with power button to power up iPhone. As you connect with USB, iPhone will be powered up. Secondly don't waste time compiling minicom. Download the binary minicom and termcap from internet. Search for unlock iPhone + minicom and unlock iphone + termcap on google. You will get link fro downloading.


Step 6
Take a NOR Dump
Now, with the switch off, your baseband should be working perfectly. Here you should take a NOR dump of your phone. I don’t know the perfect method for how to take nor dump. This is back up of your iphone if something goes wrong then you can restore it later. You can extract the firmware from this as well, which we'll get to later.

Step7
Erase the Modem Firmware with the help of ieraser tool. Search google for unlock iphone + ieraser.
So here is the first tool release, iEraser. This erases the current firmware on your modem.
Note: in every phone there is a modem (MOdulation DEModulation). You can put it again with bbupdater.

Now check the modem version in settting  about. It will be like 3.13(1.0). According to your modem version you need secpack to use this tool. The erase of this section is protected. You also need ramdisk according to your modem version.

Then go into this directory "/usr/local/standalone/firmware" and get the ICE*.fls file. Extract 0x1a4-0x9a4 and save it in a file called secpack and place it in the same directory as the ieraser tool. Run ieraser. This should erase the modem firmware. I think this unlock iphone method is vary difficult only george feel it easy.

Step 8
Patch the Firmware
Now to unlock iphone you need to patch the firmware. First extract firmware from your nor dump. Now you need range from 0x20000-0x304000. Save this file as "nor". The patches you need to apply are as follows. These are offsets from the beginning of the file to saved as "nor". Choose your version, and patch.
3.12: (213740): 04 00 a0 e1 -> 00 00 a0 e3
3.14: (215148): 04 00 a0 e1 -> 00 00 a0 e3
you need this file in next step save it properly.

Step9


Now download iunlocker software from internet. This tool uploads a small program called "testcode.bb" to the baseband using the bootrom exploit. This program needs to be in dir with NOR, the file you have obtained in the last step. You need to have the switch on when running this program. This will download and run the code in "testcode.bb" Then the program will stop and ask to turn off the switch. Do so. You type any character then hit enter. The nor download starts right away. When the counter reaches 0x2E4000, it is done.

type : bbupdater -v
It should show : +xgendata and some more text. If it does, the nor upload was successful.

Step 10: The Last One

Now in SSH go to /dev/tty.baseband
Type : minicom
If you already used up your attempt counter, the iphone should already be unlocked.

• then type: AT+CLCK=”PN”,0,”00000000″
• then type: AT+CLCK=”PN”,2 this should respond in a 0 .
That will unlock the iphone for sure.
Your iphone is now unlocked.
Exit minicom
and copy the CommCenter.plist back to its place. Reboot. iASign. And enjoy your unlocked iPhone. Now you can use any gsm sim with your iphone.

Free Unlock Iphone

This is about how to unlock iphone thought hardware. This iphone unlocking method is found by genius George Hotz. You can understand that how hard he worked for this iphone unlocking. Before applying this method, make sure you may break your iphone. Me or george are not responsible for this. For doing this unlocking iphone, you require basic software knowledge, some iphone assembling and soldering. Unlock iphone step 1 First remove the case of iphone. Generally there are three screw and aluminum case at the back side of iphone. Different iphone have different assembling so read service manual for your model. Remove the cable that connects iphone to the case. If you are sure then only continue or leave this iphone unlocking. Step 2 Now remove the metal cover that is over the pcb board of iphone. If you are confident, than disorder the battery red lead. Step3 Unlock iphone hardest step tricking the Chip As in the picture read line is showing A17 track and arrow indicate 1.8v line. This is the hardest step in entire unlock iphone procedure. Now with the multimeter probe scrape away at the trace A17. Then solder a very thin wire to A17 track. Be careful only scrape slightly at the solder mask. By doing this you can extend A17 track so do not break the track. Also solder another wire to the 1.8v line. Connect wire coming from the trace and the wire coming from the 1.8v to your unlock switch. Step 4 Test the Soldering Now check your soldering is proper or not. Check continuity with multimeter to make sure wires are not shorting to ground or to each other. Make sure switch is off. Power up your iPhone, if soldering is not proper then iphone will burn up. Now go into minicom to tty.baseband and send a few commands, AT a few times will do. It should respond OK. Now flip your switch, the baseband should stop responding. Even when you flip it back, the baseband still shouldn't respond. Be sure your switch is off, then open another ssh and run "bbupdater -v" You can get bbupdater off the ramdisk. This should reset the baseband, and minicom should start working again. If it did this, your soldering is most likely good, and you are ready to actually start unlocking your phone!!!

How to Unlock iPhone

How To Unlock Iphone

Your Options for how to unlock iPhone, do it yourself iphone unlocking.
Here is how to unlock iphone tutorial.
For example iphone is sim(subscriber identity module) locked. AT & T in United States offers limited sets of iphones compatible voice and data plans. After iphone unlocked you can use any gsm sim network around the world.

Most gsm network uses iphone lock to force customer to use their network. It may possible that in some region you may not find network coverage of that company. Iphone unlocking is most important if you are a frequent traveller and you want to use iphone for whatever gsm network.
Here are the possible ways to unlock iphones.
Three iphone unlocking options are 1) iphone unlocking with software, 2) iphone SIM unlocking, and 3) iphone unlocking through hardware.

The simple way to unlock iphone is with the use of software. It require only few click of mouse to unlock iphone. You just install the software and connect your iphone with it and with few click you can unlock your iphone. But there are many bogus software for iphone unlocking. So be careful while purchasing the iphone unlocking software.
Second method for iphone unlocking is with sim unlocking. This method is effective but it is also somehow difficult. It depend on how techno savvy you are. This is used by geeks.
The third option for iphone unlocking is with hardware. This is vary difficult method. But it can this guarantee for iphone unlock. But most careful when you use this iphone unlocking method as it may damage your iphone. Do not break your iphone. This is used by advance user or people having best knowledge of electronics. In this method you will be taking apart your iphone, then do some tough soldering on iphone pcb and then again reassemble iphone.
You can do it yourself iphone unlocking with sim or hardware method. You do not need any special device or software. But you make sure you have detailed step by step procedures about it. You can also search on internet how to unlock iphone to collect information about how to unlock iphone.
But if you want the safer way to unlock your iphone than go for software method but make sure that software provide update for future versions of iphones.
If you're not an expert in using the iPhone, take help from some iphone knowledgeable person. Or spend some bugs to unlock your iphone.